HP B-series Embedded Switches Manual do Utilizador descarregar pdf (Página 159)

Updating Switches to the Core PID Addressing

159Fabric OS Procedures Version 3.1.x/4.1.x User Guide

rmdev -Rdl fcs0

7. Log into each switch in the fabric.

8. Issue the switchdisable command.

9. Issue the configure command and change the Core Switch PID Format to

10. Issue the configenable [effective_zone_configuration]

command. For example:

configenable my_config

11. Issue the switchenable command. Enable the core switches first, then the

edges.

12. Rebuild the device entries for the affected fabric using the cfgmgr

command. For example:

cfgmgr –v

Note: This command may take several minutes to complete.

13. If you are not using multi-pathing software, vary on the disk volume groups.

The proper usage would be varyonvg <volume_group_name>. For

example:

varyonvg datavg

14. If you are not using multi-pathing software, mount all devices again and

restart I/O. For example:

mount /mnt/jbod

15. If you are using multi-pathing software, re-enable the affected path.

16. Repeat for all fabrics.

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 269 270

Sem comentários

HP B-series Embedded Switches Manual do Utilizador Página 159