HP B-series Embedded Switches Manual do Utilizador descarregar pdf (Página 140)

Updating Switches to the Core PID Addressing

140 Fabric OS Procedures Version 3.1.x/4.1.x User Guide

Overview

Core PID addressing is an option of the configure command for 2.6.0c + and

3.0.2.g+ firmware, but not 4.x firmware. In a purely 4.x fabric, it is not necessary

to enable Core PID addressing since this is set by default.

However, even if you are configuring a Core Switch 2/64 or SAN Switch 2/32

switch, it is important to note this requirement if you have a fabric that mixes 4.x

switches with other switches. In this scenario, all switches besides the 4.x series

would have to have Core PID addressing enabled. Failing to update the Core PID

addressing in non-4.x switches will result in segmentation in a mixed fabric.

The flowchart in Figure 2 shows a detailed process for adding a new switch into a

fabric.

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 269 270

Sem comentários

HP B-series Embedded Switches Manual do Utilizador Página 140