HP B-series Embedded Switches Manual do Utilizador descarregar pdf (Página 63)

Basic Switch Management

63Fabric OS Procedures Version 3.1.x/4.1.x User Guide

Tracking Switch Changes

The Track Change feature allows you to keep a record of specific changes that

may not be considered switch events, but may be useful. The output from the track

changes feature is dumped to the error log for the switch. Use the errdump

command or errshow command to view the error log.

Items in the error log created from the Track changes feature are labeled TRACK.

Trackable changes are:

— Successful login

— Unsuccessful login

— Logout

— Config file change from task

— Track-changes on

— Track-changes off

An SNMP-TRAP mode can also be enabled. Refer to the trackchangeshelp

command in the HP StorageWorks Fabric OS Version 3.1.x/4.1.x Reference Guide.

Enabling the Track Changes Feature

To enable the track changes feature:

1. Log into the switch as the admin user.

2. Enter the trackchangesset 1 command at the command line to enable

the track changes feature.

A prompt is displayed verifying that the track changes feature is on.

Example:

The output from the track changes feature is dumped to the error log for the

switch. Use the errdump command or errshow command to view the error

log.

Items in the error log created from the Track changes feature are labeled TRACK.

switch:admin> trackchangesset 1

Committing configuration...done.

switch:admin>

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 269 270

Sem comentários

HP B-series Embedded Switches Manual do Utilizador Página 63