HP B-series Embedded Switches Manual do Utilizador descarregar pdf (Página 81)

Firmware Download

81Fabric OS Procedures Version 3.1.x/4.1.x User Guide

This message will vary, depending on the operating system you are currently

running.

Note, in this example the Active CP is CP1, and the Standby CP is CP0.

5. Enter the ipaddrshow command to determine the IP address of the Active

CP.

Example

6. Log in to the Active CP as the admin user.

7. Enter the following at the command line (double-quotes are optional in 4.x

firmware):

firmwaredownload “hostIPaddr”, “user”, "path_filename”,

“password”

— hostIPaddr is the IP address of the host computer.

— user is the User ID used to log in to this computer.

— path_filename is the path location and filename of the new firmware

file.

— password is the password for the user ID specified. (Note: the

password can be NULL)

Enter the firmwaredownload command to be prompted for parameters.

8. Enter Y for yes to continue with the reboot, when prompted.

The firmware is downloaded onto both CPs, one at a time. During the process,

the active CP is rebooted and existing services may be disrupted momentarily.

switch:admin> ipaddrshow

Switch number [0 for switch0, 1 for switch1, 2 for CP0, 3 for CP1, 4

for all IP

addresses in system]: 3

CP1

Ethernet IP Address: 192.168.186.196

Ethernet Subnetmask: 255.255.255.0

HostName : cp1

Gateway Address: 192.168.186.1

switch:admin>

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 269 270

Sem comentários

HP B-series Embedded Switches Manual do Utilizador Página 81