HP B-series Embedded Switches Manual do Utilizador descarregar pdf (Página 220)

Troubleshooting

220 Fabric OS Procedures Version 3.1.x/4.1.x User Guide

— To check all switches attached components (on an FC loop), see “Check

All Switch Components Between Main Board, SFP, and Fiber Cable” on

page 223.

— To check all of a port’s attached components (on an FC loop), see “Check

Port’s External Transmit and Receive Path” on page 225.

— To view a list of additional component tests, see “Additional Component

Tests” on page 228.

Test Cascaded Switch ISL Links

To tests components to/from a neighbor switch:

1. Log into the switch as admin.

2. Enter the spinfab command with the following operands (refer to the HP

StorageWorks Fabric OS Version 3.1.x/4.1.x Reference Guide for more

details).

Example:

[-nmegs count] Specify the number of frames to send in millions.

[-ports list] (Optional) Specify a list of user ports to test.

[-setfail mode] Specify a value 1 to mark failing ports as BAD, specify

a value of 0 to not mark failed ports as bad.

[-domain value] (Optional) Specify a specific remote domain to which

the switch is connected.

switch:admin> setd/jointfilesconvert/59200/bg "DIAG", 0

switch:admin> spinfab 3,0,4

spinFab running...

spinFab: Completed 3 megs, status: passed.

port 0 test status: 0x00000000 -- passed.

port 1 test status: 0x00000000 -- passed.

port 2 test status: 0x00000000 -- passed.

port 3 test status: 0x00000000 -- passed.

port 4 test status: 0x02000000 -- SKIPPED!

1 2 ... 215 216 217 218 219 220 221 222 223 224 225 ... 269 270

Sem comentários

HP B-series Embedded Switches Manual do Utilizador Página 220