HP B-series Embedded Switches Manual do Utilizador descarregar pdf (Página 53)

Basic Switch Management

53Fabric OS Procedures Version 3.1.x/4.1.x User Guide

Fabric Configuration Settings

It is important to have consistent system configuration settings since inconsistent

parameters among switches in the same fabric can cause fabric segmentation. To

troubleshoot a fabric segmentation issue, refer to “Restoring the System

Configuration Settings” on page 55.

The following parameters are included in the System Configuration Settings:

■ Fabric Parameters

■ Virtual Channel Settings

■ Zoning Operation Parameters

■ Rscn Transmission Mode

■ NS Pre-zoning Mode

■ Arbitrated Loop Parameters

■ System Services

■ Portlog Events Enable

Displaying the Fabric Configuration Settings

To display and check system configuration settings, perform the following

procedure.

1. Log into the switch as the admin user.

2. Enter the configshow command at the command line. The system

configuration settings appear.

switch:admin> configshow

RSCN.end-device.TransmissionMode:0

alpaList:1

boot.device:fei

boot.file:/usr/switch/firmware

boot.gateway.ipa:192.168.147.172

boot.ipa:192.168.147.172:ffffff00

boot.mac:10:00:00:60:69:80:04:22

boot.name:ter172

boot.server.ipa:

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 269 270

Sem comentários

HP B-series Embedded Switches Manual do Utilizador Página 53