HP B-series Embedded Switches Manual do Utilizador descarregar pdf (Página 123)

100

101

Working With the Core Switch 2/64

123Fabric OS Procedures Version 3.1.x/4.1.x User Guide

Blade Beacon Mode

When beaconing mode is enabled, the port LEDs will flash amber in a running

pattern from port 0 through port 15 and back again. The pattern continues until the

user turns it off. This can be used to signal the user to a particular blade.

Setting the Blade Beacon Mode

To set the blade beacon mode on:

1. Log into the switch as the admin user.

2. Enter the bladebeacon command with the following syntax at the

command line:

bladebeacon slotnumber, mode

where slotnumber is the blade where you want to enable beacon mode. 1

turns beaconing mode on, or 0 turns beaconing mode off.

Example

switch:admin> bladebeacon 3, 1

switch:admin>

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 269 270

Comentários a estes Manuais

Sem comentários

HP B-series Embedded Switches Manual do Utilizador Página 123

Comentários a estes Manuais

Manuais e produtos relacionados com Comutadores de rede HP B-series Embedded Switches