HP 690n Guia do Utilizador descarregar pdf (Página 148)

Table 8-2 HP Jetdirect Configuration/General Information (continued)

Message Description

STATUS Current state of the HP Jetdirect print server.

I/O CARD READY, or READY Successfully connected to the network and is awaiting

data.

I/O CARD INITIALIZING, or INITIALIZING Initializing the network protocols. For more

information, see the status line for each protocol on the configuration page.

I/O CARD NOT READY, or ERROR Problem detected with the print server or its

configuration.

An error code and message is displayed if the print server is not ready. For more

information, see

Table 8-14 Error messages on page 150.

DATA RATE DETECTED Specifies the network data rate depending on the type of network connection:

1–54 Mbps (Wireless 802.11g)

10 Mbs, 100 Mbps, 1000 Mbps (Wired Ethernet)

MODEL NUMBER Product number of the HP Jetdirect print server (for example, J7961G)

LINK CONFIG Specifies the active link communication mode:

802.11: Wireless 802.11g

10T HALF: 10 Mbps, half-duplex (wired port)

10T FULL: 10 Mbps, full-duplex (wired port)

100TX HALF: 100Mbps, half-duplex (wired port)

100TX FULL: 100Mbps, full-duplex (wired port)

HARDWARE ADDRESS The 12-digit hexadecimal network hardware (MAC) address of the HP Jetdirect print

server installed in the printer or device. This address is assigned by the manufacturer.

PORT SELECT (Ethernet only) Specifies the port detected for use on the HP Jetdirect print server:

NONE: The print server is not connected to the network.

RJ-45: The RJ-45 network port is connected.

FIRMWARE VERSION Firmware revision number of the HP Jetdirect print server currently installed in the

printer.

LAA Locally administered address (LAA) identifies the specified LAN hardware address of a

print server, which is required by some network adiministrators. The default address is

the print server's factory-default LAN hardware address.

MANUFACTURING ID Manufacturing identification code for use by HP online support personnel.

S/N HP Jetdirect serial number.

DATE MANUFACTURED Manufacture date of the HP Jetdirect print server.

USB printer information

Information in this section applies to HP Jetdirect external print servers with USB printer connections

only.USB information on the HP Jetdirect configuration page is described in the following table. For

non-HP devices, some information might not be available.

138 Chapter 8 HP Jetdirect configuration pages

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 205 206

Sem comentários

HP 690n Guia do Utilizador Página 148