HP 690n Guia do Utilizador descarregar pdf (Página 58)

Table 3-3 Telnet Commands and Parameters (continued)

IP address for the print server. For example:

ip-config manual

ip 192.168.45.39

In the example, manual signifies manual configuration and ip sets the IP address on the

print server.

To clear the IP address, set the value to 0.0.0.0.

If you change this IP address, you must use it on the next Telnet connection.

subnet-mask

Identify the network and host portions of an IPv4 address in received messages. For

example:

subnet-mask 255.255.255.0

In the example, 255.255.255.0 is stored on the print server. To clear the subnet IP

address and disable the mask, set the value to 0.0.0.0.

NOTE: If the HP Jetdirect print server is configured by DHCP and you manually change

the subnet mask or the default gateway address, you should also change the print server's

IP address. This releases the assigned DHCP address back to the DHCP IP address pool.

default-gw IP address of a default gateway used by the print server. For example:

default-gw 192.168.40.1

In the example, 192.168.40.1 is the IP address of the default gateway.

NOTE: If the HP Jetdirect print server is configured by DHCP and you manually change

the subnet mask or the default gateway address, you should also change the print server's

IP address. This releases the assigned DHCP address back to the DHCP IP address pool.

parm-file

Path and file name whose contents are printed each time the print server is turned on.

Enter up to 64 alphanumeric characters.

Config Server

(Read only.) IP address of the server (such as a BOOTP or DHCP server) that last

configured the IP address on the HP Jetdirect print server.

TFTP Server

(Read only.) IP address of the TFTP server that provided parameters to the HP Jetdirect

print server.

TFTP Filename

(Read only.) Path and TFTP filename on the TFTP server. For example:

hpnp/printer1.cfg

domain-name Domain name for the device. For example:

domain-name support.hp.com

In the example, support.hp.com is assigned as the domain name.

The domain name does not include the host name, and is not the FQDN (such as

printer1.support.hp.com).

pri-dns-svr

IP address of the primary DNS server.

sec-dns-svr

IP address of a secondary DNS server to use if the primary DNS server is unavailable.

pri-wins-svr

IP address of the primary WINS server.

sec-wins-svr

IP address of the secondary WINS server.

48 Chapter 3 TCP/IP configuration

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 205 206

Comentários a estes Manuais

Sem comentários

HP 690n Guia do Utilizador Página 58

Comentários a estes Manuais

Manuais e produtos relacionados com Redes HP 690n