
Table 8-4 802.11 Wireless settings (continued)
Message Description
SSL Subject Subject from the CA certificate.
SSL Start Date Date the SSL certificate is valid.
Encryption Type Indicates the type. 64–bit WEP, 128–bit WEP, Dynamic (used with WEP, TKIP, or
both), Auto, or None (no encryption is used)..
Dynamic Type Indicates whether dynamic encryption is used. Disabled, Shared (pre-shared keys), or
Robust (TKIP or AES)
Available Wireless Networks Lists the available wireless networks, and their properties which include the SSID,
Channel, Strength, Capability, Security, and BSSID.
Security Settings
Information in this section of the HP Jetdirect configuration page is described in the following table.
Table 8-5 Security Settings
Message Description
802.1X Indicates which EAP/802.1X client authentication setting was selected.
EAP-TLS Use EAP-TLS.
EAP-PEAP Use EAP-PEAP.
Specified An 802.1X authentication protocol other than EAP-TLS/EAP-PEAP was
selected.
Not Specified No 802.1X authentication was selected.
IPsec
or
Firewall
If the print server and printer/MFP device supports IPsec, then IPsec appears. If IPsec is
not supported, then Firewall appears.
Current IPsec/Firewall status.
Enabled IPsec/Firewall is enabled and operating as configured.
Disabled IPsec/Firewall is turned off.
Policy Failed Print server failed to implement the selected IPsec policy. You might need
to reset security (control panel or the HP Embedded Web Server), or perform a cold
reset.
Admin Password IP Administrator password is set on the print server. This password is shared by Telnet,
the HP Embedded Web Server, and HP Web Jetadmin to control access to print server
configuration parameters. (Consists of up to 16 alphanumeric characters.)
Not Specified Password not set.
Set Password is set.
Clear the password, using a cold reset.
Cert Expires Expiration date of the digital certificate for SSL/TLS encrypted security. The date is in
UTC format (for example, “2012-10-02 12:45 UTC”).
Not Applicable Digital certificate is not installed.
142 Chapter 8 HP Jetdirect configuration pages
Comentários a estes Manuais