
Table C-1 HP Jetdirect EIO Menu on Graphical Control Panel (continued)
Menu item Sub-menu item Sub-menu item Values and Description
Proxy Server Proxy server to use by embedded applications in the
device. A proxy server is typically used by network
clients for Internet access. The proxy server caches
Web pages and provides a degree of Internet
security.
Enter its IPv4 address or FQDN (up to 255 octets).
Contact your ISP for the proxy server address, when
required.
Proxy Port Port number used by the proxy server for client
support. This port is reserved for proxy activity on your
network, and can be a value from 0 to 65535.
IPX/SPX Enable Off: Disable the IPX/SPX protocol.
On: Enable the IPX/SPX protocol.
NOTE: The factory default setting depends on the
print server model.
Frame Type Frame-type setting for your network.
Auto: Sense all types and configure the first one
detected.
EN_8023, EN_II, EN_8022, and EN_SNAP: Frame-
type selections for Ethernet networks
AppleTalk Enable Off: Disable the AppleTalk protocol.
On: Enable the AppleTalk protocol.
NOTE: The factory default setting depends on the
print server model.
DLC/LLC Enable Off: Disable the DLC/LLC protocol.
On: Enable the DLC/LLC protocol.
NOTE: The factory default setting depends on the
print server model.
Security Print Sec Page Yes: Print the current IPsec security settings.
No (default): Do not print the current settings..
NOTE: Displays only if IPsec is supported on the
print server.
Secure Web Require encrypted communication between a browser
and the HP Embedded Web Server.
HTTPS Required: Only HTTPS access is accepted. The
print server appears as a secure site.
HTTP/HTTPS Optional: Access using either HTTP or
HTTPS.
NOTE: The factory default setting depends on the
print server model.
180 Appendix C HP Jetdirect control panel menus (V.40.xx)
Comentários a estes Manuais