
Table 8-5 Security Settings (continued)
Message Description
JD Config Changes Poll Interval Number of hours to wait before checking the assessment server for device
configuration changes.
Primary Address/Host Name IP address or host name of the primary assessment server.
Primary Port Port number of the primary assessment server.
Backup Address/Host Name IP address or host name of the backup assessment server.
Backup Port Port number of the backup assessment server.
Network Statistics
Information in this section of the HP Jetdirect configuration page is described in Table 8-6 Network
Statistics on page 144.
Table 8-6 Network Statistics
Message Description
TOTAL PACKETS RECEIVED Total number of frames (packets) received by the HP Jetdirect print server without error.
Includes broadcast, multicast packets, and packets specifically addressed to the print
server. Does not include packets specifically addressed to other nodes.
UNICAST PACKETS RECEIVED Number of frames specifically addressed to this HP Jetdirect print server. Does not
include broadcasts or multicasts.
BAD PACKETS RECEIVED Total number of frames (packets) received with errors by the HP Jetdirect print server.
TOTAL PACKETS TRANSMITTED Total number of frames (packets) transmitted without error.
TCP/IP protocol information
Information in this section of the HP Jetdirect configuration page is described in the following table. For
general TCP/IP configuration parameters, see
Table 8-7 TCP/IP configuration information
on page 144. For IPv4 parameters, see Table 8-8 IPv4 Section on page 145. For IPv6 parameters,
see
Table 8-9 IPv6 Section on page 147. For error messages, see Table 8-14 Error messages
on page 150.
Table 8-7 TCP/IP configuration information
Message Description
IPv4
and
IPv6
Status of IPv4 and IPv6 protocols on the print server:
Enabled Protocol is active.
Disabled Protocol is inactive.
HOST NAME Host name configured on the print server. It might be truncated.
Not Specified Host name not specified in a BOOTP response or TFTP configuration file.
NPIxxxxxx Default name is NPIxxxxxx, where xxxxxx represents the last six digits of the
LAN hardware (MAC) address.
144 Chapter 8 HP Jetdirect configuration pages
Comentários a estes Manuais