HP VMA-series Memory Arrays Manual do Utilizador descarregar pdf (Página 215)

General Commands

HP-AM456-9002A Rev 01

VMA-series Memory Array Installation and Service Guide

215

Where:

The available commands and sublevels are different in each context level.

exit

Exits the CLI.

Syntax

exit

format

Configures the system for a specific percentage of usable flash capacity.

Note: Use this command only on a flash-based Memory Arrays.

Note: The format command will be rejected if there are any open files

accessing the memory array storage device (/dev/vtmsa). Close any open

files or unmount any mounted filesystems using the storage device. To unmount

the file system use the umount Linux command (e.g., umount /dev/vtmsa).

Syntax

format flash-capacity [

<value>]

context_level Specifies the context level to navigate to. Valid

values are:

• chassis (See Chassis Context Commands on page

221.)

• cli (See CLI Context Commands on page 245.)

• raid (See RAID Context Commands on page 251.)

• system (See System Context Commands on page

257.)

1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 299 300

Sem comentários

HP VMA-series Memory Arrays Manual do Utilizador Página 215