HP VMA-series Memory Arrays Manual do Utilizador descarregar pdf (Página 239)

Ethernet 0 Context Commands

HP-AM456-9002A Rev 01

VMA-series Memory Array Installation and Service Guide

239

Syntax

set dhcp {enabled | disabled}

Where:

Use the save config command to save the changes across system reboots.

set ip-address

Manually sets the IP address of the system.

Syntax

set ip-address <ipaddr>[:<netmask>[:<gateway>]]

Where:

Use the save config command to save the changes across system reboots.

clear ip-address

Clears the provisioned ip/netmask/gateway to use when DHCP is disabled.

Syntax

clear ip-address

Use the save config command to save the changes across system reboots.

set dns-config

Sets the current DNS configuration type of the system when DHCP has been

enabled. Set the DNS configuration type either manually or automatically.

enabled Enables using DHCP to automatically set the system’s

IP address.

disabled Disables using DHCP to automatically set the

system’s IP address.

ipaddr

Specifies the system’s new IP address.

netmask

Optional. Specifies the system’s new netmask.

gateway

Optional. Specifies the system’s new gateway address.

1 2 ... 234 235 236 237 238 239 240 241 242 243 244 ... 299 300

Sem comentários

HP VMA-series Memory Arrays Manual do Utilizador Página 239