HP VMA-series Memory Arrays Manual do Utilizador descarregar pdf (Página 236)

100

101

Appendix D - CLI Reference

236

VMA-series Memory Array Installation and Service Guide

HP-AM456-9002A Rev 01

Controller Context Commands

Figure D.7 Chassis>Controller Context Commands

The table below describes the commands available at the Controller context

sublevel of the CLI.

set serial-speed

Sets the speed of the serial port to either 9600 or 115200.

After the changing the serial-speed setting, reboot the Memory Array.

Syntax

set serial-speed {9600 | 115200}

show serial-speed

Shows the speed of the serial port at either 9600 or 115200.

Table D.8 Controller Context Commands

Command Description

context ethernet 0 Moves the user to the Ethernet 0 context level.

See Ethernet 0 Context Commands on page

238.

set serial-speed Sets the speed of the serial port.

show serial-speed Shows the speed of the serial port.

1 2 ... 231 232 233 234 235 236 237 238 239 240 241 ... 299 300

Comentários a estes Manuais

Sem comentários

HP VMA-series Memory Arrays Manual do Utilizador Página 236

Comentários a estes Manuais

Manuais e produtos relacionados com Servidores HP VMA-series Memory Arrays