HP VMA-series Memory Arrays Manual do Utilizador descarregar pdf (Página 84)

Chapter 5 - Operating the System via the CLI

VMA-series Memory Array Installation and Service Guide

HP-AM456-9002A Rev 01

If the VIMM configuration is invalid, or the system is rebuilding the RAID groups,

then up to two extra lines are displayed that list:

• ID numbers of the affected VIMMs

• When the RAID group rebuild is active

• Affected RAID group and VIMM

Displaying the System Operational Time

Display how long a system has been operational since the last time it was

rebooted (i.e., uptime). The time is displayed in tenths of a second and in year, day,

HH:MM:SS

format.

To display how long the system has been operational:

1. Log into the Memory Array.

2. Navigate to the

System

context level. At the root prompt, type:

3. At the

System

context prompt, type:

The command displays information similar to the following:.

Where:

slot port-2

state enabled

protocol pcie

link-width 4

neg-link-width 4

max-data-rate 10 Gb/s

cfg-data-rate 10 Gb/s

host detected

slot port-0

state disabled

host undetected

context system

show uptime

system> show uptime

tenths-second 132712724

time 0 years, 153 days, 14:27:52

tenths-second Displays how long, in tenths of a second, the system

has been operational since the last power cycle or

system reboot.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 299 300

Sem comentários

HP VMA-series Memory Arrays Manual do Utilizador Página 84