HP VMA-series Memory Arrays Manual do Utilizador Página 69
- Página / 300
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Configuring Domain Name System (DNS)
HP-AM456-9002A Rev 01
VMA-series Memory Array Installation and Service Guide
69
3. At the
Ethernet 0
context prompt, type:
If DNS is currently in automatic mode, then the status for
dns-config
displays
automatic. In the following example, the DNS name server IP address and the
DNS search domain values have been pre-provisioned.
For information on clearing the provisioned DNS settings see Clearing
Provisioned DNS Information on page 89.
Setting the DNS Mode
To set the DNS mode on the Memory Array:
1. Log into the CLI via a serial connection or the Ethernet interface (see
Connecting to the CLI on page 59).
2. Navigate to the
Ethernet 0
context level. At the root prompt, type:
3. At the
Ethernet 0
context prompt, type:
Where:
You can pre-provision the IP address of the name server and the search domain
name while the DNS mode is set to automatic. See Configuring the DNS Name
on page 67 and Configuring the DNS Search Domain Name on page 68. Change
the DNS mode to manual to use the pre-provisioned values.
show
chassis controller ethernet 0> show
dhcp enabled
ip-address 10.10.0.126
netmask 255.255.255.0
gateway 10.10.0.1
mac-address 00:1B:97:00:00:06
dns-config automatic
dns-nameserver 10.10.0.2
dns-search violintech.net
prov-dns-nameserver 10.10.0.55
prov-dns-search violintech-prod.net
context chassis controller ethernet 0
set dns-config { manual | auto }
manual Sets the DNS mode to manual.
auto Sets the DNS mode to automatic.
- HP VMA-series Memory Array 1
- LEGAL NOTICES 2
- COMPLIANCE INFORMATION 3
- Notice Description 3
- Table of Contents 12
- List of Figures 13
- List of Tables 15
- Document Organization 17
- Document Conventions 18
- Safety Icons 18
- Typographical Conventions 19
- Security 19
- Reference Documents 19
- Contacting HP 19
- Product Overview 21
- VMA-series Overview 23
- Features 24
- Physical Components 24
- System LEDs 25
- Power Supplies 27
- Figure 1.6 Fan Module 28
- Management Interfaces 29
- Storage Interfaces 29
- System Specifications 31
- 53 for more information 32
- Supported Operating Systems: 32
- VIMM Types 34
- VIMM Configurations 35
- VIMM Slot Locations 35
- 42–Module Configuration 36
- Operation 37
- Installing the Array 39
- Rack-Mounting the Chassis 42
- Equipment Rack 42
- Connecting Power 47
- Power Requirements 47
- Connecting Equipment Ground 48
- Connecting Management Network 50
- Connecting the Serial Cable 50
- Connecting the Ethernet Cable 51
- Ethernet 52
- Host Computer 53
- Memory Gateway 54
- Powering up the Memory Array 56
- Configuring the Array 57
- Memory Array Default Settings 58
- Connecting to the CLI 59
- Changing the Admin Password 62
- Changing the Hostname 64
- Configuring DHCP Settings 65
- Displaying DHCP Status 65
- Enabling DHCP 65
- Disabling DHCP 66
- Configuring the DNS Name 67
- Ethernet 0 68
- Setting the DNS Mode 69
- Syslog Host 71
- Formatting the Memory Array 74
- Connecting via SSH 76
- Connecting via Telnet 76
- Setting the Number of Columns 79
- Setting the Pagination Mode 82
- HH:MM:SS 84
- Retrieving the MAC Address 88
- RAID Group 90
- Displaying Fan Status 94
- Displaying Alarms and Logs 96
- Displaying the Current Alarms 96
- Displaying the System Log 96
- Displaying the Messages Log 97
- Rebooting the Memory Array 98
- Rebooting the System 98
- Canceling a Scheduled Reboot 98
- Upgrading the System Software 100
- Using SCP 101
- Length 102
- Displaying the Upgrade Path 105
- HP-AM456-9002A Rev 01 106
- Servicing the Array 107
- Safety Precautions 108
- ESD Precautions 108
- Testing the LEDs 109
- Testing the System LEDs 109
- Testing the VIMM LEDs 110
- Replacing the Fans 111
- PORT 1 PORT 2 112
- Replacing VIMMs 113
- Host Utilities 115
- Linux Drivers 117
- Linux Drivers Overview 118
- Kernel Development Package 119
- GCC Compiler 120
- Libaio Development Package 120
- Installing Linux Drivers 120
- Removing the Linux Drivers 125
- Unloading the Linux Driver 127
- /dev/vtmsa<n> 131
- Partitions 133
- Windows Drivers 135
- Windows Driver Overview 136
- Installing Prerequisites 136
- Installing Windows Drivers 137
- Click the Next button 138
- Chapter 8 - Windows Drivers 140
- (driver-storport-Dx.x.x.zip) 141
- Removing the Windows Drivers 143
- Removing the Violin Utilities 148
- Violin Utilities 149
- Running the Violin Utilities 150
- Violin Utilities Reference 150
- Option Description 164
- Product Models 179
- Appendix A - Product Models 180
- Compliance Information 181
- Lithium Battery Caution 183
- Cabinet Safety Precautions 183
- European Union RFI Statement 184
- Korea RFI Statement 185
- Canada RFI Statement 185
- Australia C-Tick Label 185
- Alarm Reference 187
- Interpreting Alarm LEDs 188
- Message Commands 189
- Service-Affecting Alarms 190
- Port Service-Affecting Alarms 192
- RAID Service-Affecting Alarms 193
- Appendix C - Alarm Reference 194
- VIMM Service-Affecting Alarms 196
- Non-Service Affecting Alarms 196
- 1 or 2. The Alarm LED is not 200
- 1) or bottom (2) 207
- CLI Reference 209
- Appendix D - CLI Reference 210
- Context Navigation 211
- Typing CLI Commands 211
- General Commands 213
- <context_level> 214
- Chassis Context Commands 221
- Board 0 Context Commands 223
- Slot Context Commands 227
- VIMM Context Commands 230
- VIMM-summary Context Commands 233
- Output Description 235
- Controller Context Commands 236
- Ethernet 0 Context Commands 238
- Fan-tray Context Commands 243
- Fan Context Commands 244
- CLI Context Commands 245
- Cancels the oam_cli session 250
- RAID Context Commands 251
- RAID Group Context Commands 253
- Maps Context Commands 255
- System Context Commands 257
- Alarms Context Commands 273
- Boot-params Context Level 275
- LED-state Context Commands 277
- Logging Context Commands 279
- In-memory Context Commands 281
- Category Context Commands 285
- Syslog Context Commands 287
- Status Context Commands 290
- Sw-upgrade Context Commands 294
- Uptime Context Commands 297
- Version Context Commands 298
Manuais e produtos relacionados com Servidores HP VMA-series Memory Arrays
Servidores HP C3000 Manual do Utilizador
(28 páginas)
(28 páginas)
Servidores HP ProLiant DL385 Manual do Utilizador
(42 páginas)
(42 páginas)
Servidores HP SN1000E Guia de Instalação
(32 páginas)
(32 páginas)
Servidores HP 3PAR Manual do Utilizador
(51 páginas)
(51 páginas)
Servidores HP AiO600 Manual do Utilizador
(17 páginas)
(17 páginas)
Servidores HP sx2000 Manual do Utilizador
(200 páginas)
(200 páginas)
Servidores HP DL380 Guia de Instalação
(48 páginas)
(48 páginas)
Servidores HP X9300 Guia do Utilizador
(163 páginas)
(163 páginas)
Servidores HP SL6000 Manual do Utilizador
(25 páginas)
(25 páginas)
Servidores HP WS460c Manual do Utilizador
(24 páginas)
(24 páginas)
Servidores HP ProLiant DL120 Manual do Utilizador
(33 páginas)
(33 páginas)
Servidores HP pn1050 Guia de Configuração
(21 páginas)
(21 páginas)
Servidores HP BL685c Manual do Utilizador
(23 páginas)
(23 páginas)
(57 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.026 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais