HP VMA-series Memory Arrays Manual do Utilizador descarregar pdf (Página 31)

System Specifications

HP-AM456-9002A Rev 01

VMA-series Memory Array Installation and Service Guide

System Specifications

The table below lists the Memory Array system specifications.

Direct-attached Host Computer Requirements

The table below lists the minimum requirements for a direct-attached host

computer used with the Memory Array.

Table 1.3 System Specifications

Specification Description

Electrical Input Power Voltage: 120 V or 240 V

Current Capacity: 12 A @ 120 V or 7 A @ 240 V

Environmental Ambient Operating Temperature: 5 °C to 35 °C

Short Term: -5 °C to 40 °C

Operating Humidity: 5 to 85% (Non-Condensing)

Short Term: 5 to 90% (Non-Condensing)

Interfaces x8 PCIe Interface (2)

Note: When both PCIe interfaces are used they become

x4.

Serial Interface via DB-9 male DTE port

10/100 Ethernet port

Logging Syslog

Management CLI: Serial, Telnet, SSH

Physical Height: 5.19" (3U/132 mm)

Depth: 28.38" (721mm)

Width: 16.915" (430mm)

Minimum Rear Clearance: 7" (178mm)

Maximum Weight: 76 lbs (34.5 kg)

Table 1.4 Direct-attached Host Computer Requirements

Minimum Requirements

Intel/AMD x86 or x86_64 computer

An available PCIe slot that communicates with the processor. Slots capable of

bidirectional x8 PCIe provide the best performance.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 299 300

Sem comentários

HP VMA-series Memory Arrays Manual do Utilizador Página 31