HP VMA-series Memory Arrays Manual do Utilizador descarregar pdf (Página 76)

Chapter 5 - Operating the System via the CLI

VMA-series Memory Array Installation and Service Guide

HP-AM456-9002A Rev 01

Connecting to the CLI

Connect to the Memory Array’s CLI via SSH or Telnet on the host computer over

the Ethernet interface.

You can also log into the system via the serial port. See Logging into the CLI via

the Serial Interface on page 59 for instructions.

To connect to the Memory Array from a Windows machine, see Logging in via a

Windows host computer on page 59.

Note: The default command line editor for the admin user is

Emacs

. You can

change the default editor to

, see Setting the Command Line Editor on page 80.

Connecting via SSH

Connect to the CLI via SSH through your host computer.

On a Linux host, use your preferred command shell. On a Windows host, use a

GUI application, such as PuTTY, to SSH to the Memory Array.

The following is an example of what you will see after successfully connecting to

the CLI.

Connecting via Telnet

Connect to the CLI via a Telnet session on your host computer.

**************************************************************************

* OAM-CLI *

* *

* Operations, Administration & Maintenance - Command Line Interface *

* *

* S/W Build Info:

Date

17:15:13 *

* swbuild.violintech.net by user common *

* *

* Release = Release 3.4 *

* *

**************************************************************************

You are at the root node.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 299 300

Sem comentários

HP VMA-series Memory Arrays Manual do Utilizador Página 76