HP VMA-series Memory Arrays Manual do Utilizador descarregar pdf (Página 54)

100

101

Chapter 3 - Installing the Array

VMA-series Memory Array Installation and Service Guide

HP-AM456-9002A Rev 01

Memory Gateway

The steps for connecting the Memory Array to a memory gateway are:

1. Orient the unconnected end of the PCIe cable(s) to align with the PCIe

connector on the back of the Memory Gateway. The PCIe cable is keyed and

only goes in one way.

2. Securely plug the cable(s) into the PCIe connector.

3. Power-up the Memory Array (see Powering up the Memory Array on page

56). Ensure the RAID/ADMIN Status LED is solid green indicating the PCIe

ports have stabilized before continuing (approximately 1 minute).

4. Power-up the Memory Gateway.

5. Verify the PCIe connection(s).

Refer to the

vSHARE Memory Gateway Installation and User's Guide

for more

information.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 299 300

Comentários a estes Manuais

Sem comentários

HP VMA-series Memory Arrays Manual do Utilizador Página 54

Comentários a estes Manuais

Manuais e produtos relacionados com Servidores HP VMA-series Memory Arrays