HP VMA-series Memory Arrays Manual do Utilizador Página 25
- Página / 300
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Physical Components
HP-AM456-9002A Rev 01
VMA-series Memory Array Installation and Service Guide
25
The power button on the front of the array can be used to cause the array to
enter into a
shutdown
mode similar to executing the shutdown CLI command.
With a
shutdown
the media is taken offline and I/O stopped to the connected
hosts, but the array is left powered on and able to be managed via the CLI. Use
the reboot CLI command to bring the array media back online and allow I/O to
the connected hosts.
To shut down the system from the front panel, depress the power button for 4
seconds. If the LCD does not indicate the system is shutting down after 10
seconds, depress the power button for another 4 seconds. The LCD should
display that the system is shutdown and it is safe to remove the power cords if
desired.
Note: The array is not actually powered off when using the power button.
Instead the array is logically shut down and the data paths are disabled, placing
the array in a safe mode for removing power cords.
Before turning off power to the Memory Array, shut down any direct-attached
hosts.
Rear View
The rear panel provides the interfaces for connecting input and output devices,
and power supplies. Each interface on the rear of the system has an associated
LED and indicates if the interface is in use or not.
Figure 1.2 Memory Array - Rear View
System LEDs
Eight system LEDs are located on the front of the Memory Array and four system
LEDs are on the rear.
LOC
A RAID
ADMIN
AC OK
DC OK
STATU S
ALARM
B
PCIe
Port 1
PCIe
Port 2
Rear
LEDs
Serial
Console
GND
Ethernet
Port
Power
Supply A
Power
Supply B
- HP VMA-series Memory Array 1
- LEGAL NOTICES 2
- COMPLIANCE INFORMATION 3
- Notice Description 3
- Table of Contents 12
- List of Figures 13
- List of Tables 15
- Document Organization 17
- Document Conventions 18
- Safety Icons 18
- Typographical Conventions 19
- Security 19
- Reference Documents 19
- Contacting HP 19
- Product Overview 21
- VMA-series Overview 23
- Features 24
- Physical Components 24
- System LEDs 25
- Power Supplies 27
- Figure 1.6 Fan Module 28
- Management Interfaces 29
- Storage Interfaces 29
- System Specifications 31
- 53 for more information 32
- Supported Operating Systems: 32
- VIMM Types 34
- VIMM Configurations 35
- VIMM Slot Locations 35
- 42–Module Configuration 36
- Operation 37
- Installing the Array 39
- Rack-Mounting the Chassis 42
- Equipment Rack 42
- Connecting Power 47
- Power Requirements 47
- Connecting Equipment Ground 48
- Connecting Management Network 50
- Connecting the Serial Cable 50
- Connecting the Ethernet Cable 51
- Ethernet 52
- Host Computer 53
- Memory Gateway 54
- Powering up the Memory Array 56
- Configuring the Array 57
- Memory Array Default Settings 58
- Connecting to the CLI 59
- Changing the Admin Password 62
- Changing the Hostname 64
- Configuring DHCP Settings 65
- Displaying DHCP Status 65
- Enabling DHCP 65
- Disabling DHCP 66
- Configuring the DNS Name 67
- Ethernet 0 68
- Setting the DNS Mode 69
- Syslog Host 71
- Formatting the Memory Array 74
- Connecting via SSH 76
- Connecting via Telnet 76
- Setting the Number of Columns 79
- Setting the Pagination Mode 82
- HH:MM:SS 84
- Retrieving the MAC Address 88
- RAID Group 90
- Displaying Fan Status 94
- Displaying Alarms and Logs 96
- Displaying the Current Alarms 96
- Displaying the System Log 96
- Displaying the Messages Log 97
- Rebooting the Memory Array 98
- Rebooting the System 98
- Canceling a Scheduled Reboot 98
- Upgrading the System Software 100
- Using SCP 101
- Length 102
- Displaying the Upgrade Path 105
- HP-AM456-9002A Rev 01 106
- Servicing the Array 107
- Safety Precautions 108
- ESD Precautions 108
- Testing the LEDs 109
- Testing the System LEDs 109
- Testing the VIMM LEDs 110
- Replacing the Fans 111
- PORT 1 PORT 2 112
- Replacing VIMMs 113
- Host Utilities 115
- Linux Drivers 117
- Linux Drivers Overview 118
- Kernel Development Package 119
- GCC Compiler 120
- Libaio Development Package 120
- Installing Linux Drivers 120
- Removing the Linux Drivers 125
- Unloading the Linux Driver 127
- /dev/vtmsa<n> 131
- Partitions 133
- Windows Drivers 135
- Windows Driver Overview 136
- Installing Prerequisites 136
- Installing Windows Drivers 137
- Click the Next button 138
- Chapter 8 - Windows Drivers 140
- (driver-storport-Dx.x.x.zip) 141
- Removing the Windows Drivers 143
- Removing the Violin Utilities 148
- Violin Utilities 149
- Running the Violin Utilities 150
- Violin Utilities Reference 150
- Option Description 164
- Product Models 179
- Appendix A - Product Models 180
- Compliance Information 181
- Lithium Battery Caution 183
- Cabinet Safety Precautions 183
- European Union RFI Statement 184
- Korea RFI Statement 185
- Canada RFI Statement 185
- Australia C-Tick Label 185
- Alarm Reference 187
- Interpreting Alarm LEDs 188
- Message Commands 189
- Service-Affecting Alarms 190
- Port Service-Affecting Alarms 192
- RAID Service-Affecting Alarms 193
- Appendix C - Alarm Reference 194
- VIMM Service-Affecting Alarms 196
- Non-Service Affecting Alarms 196
- 1 or 2. The Alarm LED is not 200
- 1) or bottom (2) 207
- CLI Reference 209
- Appendix D - CLI Reference 210
- Context Navigation 211
- Typing CLI Commands 211
- General Commands 213
- <context_level> 214
- Chassis Context Commands 221
- Board 0 Context Commands 223
- Slot Context Commands 227
- VIMM Context Commands 230
- VIMM-summary Context Commands 233
- Output Description 235
- Controller Context Commands 236
- Ethernet 0 Context Commands 238
- Fan-tray Context Commands 243
- Fan Context Commands 244
- CLI Context Commands 245
- Cancels the oam_cli session 250
- RAID Context Commands 251
- RAID Group Context Commands 253
- Maps Context Commands 255
- System Context Commands 257
- Alarms Context Commands 273
- Boot-params Context Level 275
- LED-state Context Commands 277
- Logging Context Commands 279
- In-memory Context Commands 281
- Category Context Commands 285
- Syslog Context Commands 287
- Status Context Commands 290
- Sw-upgrade Context Commands 294
- Uptime Context Commands 297
- Version Context Commands 298
Manuais e produtos relacionados com Servidores HP VMA-series Memory Arrays
Servidores HP C3000 Manual do Utilizador
(28 páginas)
(28 páginas)
Servidores HP ProLiant DL385 Manual do Utilizador
(42 páginas)
(42 páginas)
Servidores HP SN1000E Guia de Instalação
(32 páginas)
(32 páginas)
Servidores HP 3PAR Manual do Utilizador
(51 páginas)
(51 páginas)
Servidores HP AiO600 Manual do Utilizador
(17 páginas)
(17 páginas)
Servidores HP sx2000 Manual do Utilizador
(200 páginas)
(200 páginas)
Servidores HP DL380 Guia de Instalação
(48 páginas)
(48 páginas)
Servidores HP X9300 Guia do Utilizador
(163 páginas)
(163 páginas)
Servidores HP SL6000 Manual do Utilizador
(25 páginas)
(25 páginas)
Servidores HP WS460c Manual do Utilizador
(24 páginas)
(24 páginas)
Servidores HP ProLiant DL120 Manual do Utilizador
(33 páginas)
(33 páginas)
Servidores HP pn1050 Guia de Configuração
(21 páginas)
(21 páginas)
Servidores HP BL685c Manual do Utilizador
(23 páginas)
(23 páginas)
(57 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.027 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais