HP VMA-series Memory Arrays Manual do Utilizador descarregar pdf (Página 96)

Chapter 5 - Operating the System via the CLI

VMA-series Memory Array Installation and Service Guide

HP-AM456-9002A Rev 01

Displaying Alarms and Logs

Display the current alarms that light the System LED on the Memory Array to

help prevent system damage in the case of a fan failure, lid removal, or to

diagnose performance problems when one or more VIMMs are affected by high

temperatures.

See Appendix C, Alarm Reference for more information on alarms.

If the alarms and logs do not provide enough information to resolve an issue, run

the vincident utility to collect information from the host computer and

memory array, and contact HP Customer Support (or service provider). See

vincident on page 155 and Contacting HP on page 19.

Displaying the Current Alarms

1. Log into the Memory Array.

2. Navigate to the

System

context level. At the root prompt, type:

3. At the

System

context prompt, type:

The command displays information similar to the following:

Displaying the System Log

Display the data contained in the log on the Memory Array. The log is displayed

in a paginator window, unless you have disabled the paginator options. Setting

the Pagination Mode on page 82 for detailed instructions on using the window

pagination.

To display the system’s log:

1. Log into the Memory Array.

2. Navigate to the

System

context level. At the root prompt, type:

3. At the

System

context prompt, type:

context system alarms

show

system> show alarms

alarm1 Lid removed

alarm2 Top fan tray removed

alarm3 Bottom-left fan running too slowly, 2000 RPM

alarm4 VIMM 14 low 1.8V, 1.68 volts; VIMM shut down

alarm5 VIMM 68: hot, 71 C

context system

show log

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 299 300

Comentários a estes Manuais

Sem comentários

HP VMA-series Memory Arrays Manual do Utilizador Página 96

Comentários a estes Manuais

Manuais e produtos relacionados com Servidores HP VMA-series Memory Arrays