HP VMA-series Memory Arrays Manual do Utilizador descarregar pdf (Página 264)

Appendix D - CLI Reference

264

VMA-series Memory Array Installation and Service Guide

HP-AM456-9002A Rev 01

set boot-params

Sets the system boot parameters.

Syntax

set boot-params stagger-mem-clear <value>

Where

set clock-source

Sets the system clock source. The source can be set to the host computer or

the Memory Array. The system clock only keeps a running count of the number

of seconds that the system has been operational. It doesn’t keep an accurate

calendar date and time. If the system is rebooted, then the elapsed time is not

accounted for when the system finishes the reboot process and is again

operational.

Syntax

set clock-source {host | local}

Where:

save config

Commits the admin login password and system log service changes to flash or

reverts back to the factory default settings. If the changes are not committed

before the system is rebooted, then the changes are lost and the previous

settings are used.

Syntax

save config

value Is either enable or disable.

host Sets the clock source to the host computer. This is the

default value.

local Sets the clock source to the Memory Array.

1 2 ... 259 260 261 262 263 264 265 266 267 268 269 ... 299 300

Sem comentários

HP VMA-series Memory Arrays Manual do Utilizador Página 264