
OpenBSD/hppa Supported hardware
3.6.3 Supported hardware
Processors
32-bit PA-RISC 1.0 PA-7000, PA-7100, PA-7100LC, PA-7200 and PA-7300LC; some systems with
64-bit processors in 32-bit mode: PA-8000, PA-8200, PA-8500, PA-8600 and PA-8700.
Buses and chipsets
All PCI, GSC and Runway buses and onboard bus controllers (ASP, LASI, Dino/Cujo, U2/Uturn, Astro
and Elroy) on the above machines are supported. Additionally, Yenta-compatible PCI-Cardbus bridges
are supported, as for instance found on the RDI Precisionbook.
ISA/EISA and HP-PB buses and bus controllers are not supported. Support for the EISA bus controller
is in progress.
Networking
All on-board Ethernet and Fast-Ethernet network interfaces on the above machines are supported;
the FDDI on the 735/755 are not supported. Expansion cards for the GSC/HSC and PCI bus slots
with a supported Ethernet (10, 100 and Gigabit) chipset (Intel i82596, DEC 21142/43 Tulip, Intel
EtherExpress PRO/10 and PRO/100 series, Intel Gigabit chipsets, in various incarnations for the PCI
bus, NE2000-compatible, 3Com 3c9xx EtherLink XL) should also work. PCMCIA (and to a lesser
extent Cardbus) devices are supported in a compatible PCI-Cardbus bridges, including various WLAN
and Ethernet cards (the OpenBSD port page has the current and complete list).
Storage
Storage is at the moment supported via either the NCR 53C700 narrow, NCR 53C710 Fast-Narrow,
NCR 53C720 Fast-Wide (HVD/differential) or the NCR 53C875 Ultra-Wide SE SCSI controllers.
GSC/HSC and PCI expansion cards with one of the 53C7x0 or 53C8xx SCSI chipsets and Adaptec
2940 PCI SCSI adapters should also work, though are not neccessarily bootable.
Various newer PCI SCSI controllers based on Adaptec (AHA) and LSI Fusion-MPT chipsets are also
supported, though also not bootable.
Graphics
All on-board graphics adapters are supported for text-mode via STI routines (similar to PC VGA BIOS),
additionally the CRX, CRX-24, HCRX-8, HCRX-24, Visualize-EG and Visualize-FX (FX2, FX4 and
FX6) graphics expansion boards (GSC and PCI) are supported. At the present, there is no working X
server for OpenBSD/hppa, so there are no graphics (X11) capabilities for now.
Human I/O and multimedia
Input/output is supported via PS/2 or HIL on-board interfaces, though not all HIL devices are sup-
ported.
104
Comentários a estes Manuais