
HP Visualize C132L & C160L External connectors
The Wide-SCSI cable is normally used for the internal 3.5″ 68-pin Fast-Wide high-voltage differential
system drives. Up to three hard drives can be installed in the cage, which leaves no room for an
external-accessible CD/DAT drive though. The Fast-Wide drives are also bootable from the PDC.
A standard configuration could look like this:
Two 3.5″ 68-pin Fast-Wide differential (HVD) SCSI hard drives,
One 3.5″ Floppy drive and
One external-accessible half-height 5.25″ SCSI drive (CD/DAT).
4.20.3 External connectors
50-pin HD SCSI-2 single-ended
68-pin HD SCSI-3 Fast-Wide differential (HVD)
Two DB9 male RS232C serial (up 460.8Kb/s)
DB25 female parallel
TP/RJ45 10Mbit Ethernet
15-pin AUI 10Mbit Ethernet
EVC graphics port (See Note 1)
Two PS/2 connectors for keyboard and mouse
HP-HIL for input device loop
Four phone jacks (microphone, headphones, line-in and ?)
Notes
1. You need a special HP adapter-cable to convert this EVC-port to either BNC or HD15 VGA
4.20.4 ROM update
There is a firmware update available for the C160L, which contains the latest version (5.8).
PF_CB1X0058.txt
80
has details about the contents and installation of the patch.
PF_CB1X0058
81
contains the patch.
4.20.5 References
Manuals
C160L Owners Guide
82
(PDF, 1.6MB)
C-Class Service handbook
83
(PDF, 1.6MB)
80
ftp://ftp.itrc.hp.com/firmware_patches/hp/cpu/PF_CB1X0058.txt
81
ftp://ftp.itrc.hp.com/firmware_patches/hp/cpu/PF_CB1X0058
82
http://h20000.www2.hp.com/bc/docs/support/SupportManual/lpv37959/lpv37959.pdf
83
http://h20000.www2.hp.com/bc/docs/support/SupportManual/lpv37954/lpv37954.pdf
201
Comentários a estes Manuais