
HP i2000 External connectors
Memory
PC100 registered SDRAM DIMMs
Up to two memory expansion cards (MECs)
Eight slots on each MEC
Up to 1GB modules
16GB maximum (16×1GB — 8GB on each MEC) [some say 16GB is not supported — not sure
what that means]
Expansion
Five PCI 64-bit/66MHz slots, 3.3V
Two PCI 64-bit/33MHz slots, 5V
One AGP Pro 110 slot (supports AGP-1x, 3x, 4x, or AGPpro-110)
Drives
Three (1.6″ ) or five (1″ ) internal 3.5″ bays for hard drives
Three half-heigth 5.25″ bays for externally accessible drives
One 3.5″ bay for externally accessible drive (standard shipped with a LS-120 drive)
4.32.3 External connectors
10/100 Ethernet TP/RJ45
Four USB ports (two on front, two on rear)
DB9 male RS232C serial
Two PS/2 for keyboard and mouse
Three phone jacks (microphone, line-in and line-out)
4.32.4 References
Manuals
HP Workstation i2000 Owner’s Guide
174
(PDF) Hewlett-Packard Company (May 2001, first
edition)
174
http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/lpv37642/lpv37642.pdf
250
Comentários a estes Manuais