
HP Visualize B2000 & B2600 External connectors
Memory
278-pin 120MHz ECC SD-RAM DIMMs
Takes 128MB-1GB modules
Four slots
128MB (1×128) minimum, 4GB (4×1GB) maximum
Expansion
Two PCI 64-bit/33MHz, 5V slots (clocked at 66MHz on B2600)
Two PCI 32-bit/33MHz, 5V slots
B2000 I/O slot layout (from top to bottom):
1. PCI-64/33, 5V
2. PCI-64/33, 5V
3. PCI-32/33, 5V
4. PCI-32/33, 5V
B2600 I/O slot layout (from top to bottom):
1. PCI-32/33, 5V, short PCI cards
2. PCI-32/33, 5V, short PCI cards
3. PCI-64/33, 5V, short and full-length cards
4. PCI-64/33, 5V, short and full-length cards
Drives
One tray for two 3.5″ Ultra2-Wide LVD SCSI hard drives with 80-pin SCA connector
One tray for a 3.5″ Floppy drive
One tray for a half-heigth 5.25″ IDE drive, external accessible
4.18.3 External connectors
B2000: HD15 VGA
Two DB9 male RS232C serial
DB25 female parallel
TP/RJ45 10/100Mbit Ethernet
Two USB ports for keyboard & mouse
Four audio jacks (microphone, headphones, line-in and line-out) (on B2600 the audio card is
optional)
192
Comentários a estes Manuais