
HP N4000 (rp7400) External connectors
Expansion
10 “Twin-Turbo” PCI 64-bit/66MHz slots, each on an independent PCI bus, each connected via
two I/O links/ropes (aggregate 530MB/s), hot-plug capable
Two “Turbo” PCI 64-bit/66MHz slots, each on an independent PCI bus, each connected via one
I/O link/rope (265MB/s), hot-plug capable (one of these two Turbo slots is reserved for Core I/O
LAN/SCSI)
All slots keyed for 5.0V (support either 5.0V or universal PCI cards)
Drives
Two internal Ultra SCSI LVD 3.5″ drives with SCA connector, hot-pluggable
4.35.3 External connectors
68-pin VHDCI Ultra LVD external SCSI
Three DB9 male RS232C serial (local console, remote console, general purpose) via a DB25 “M
cable”
10/100Mbit Ethernet TP/RJ45
10/100Mbit Ethernet TP/RJ45 LAN console
4.35.4 ROM update
There is an firmware update available for the N4000/rp7400 (A3639A, A3639B, A3639C) which con-
tains the latest version 43.43.
PF_CPIW4343.txt
188
has details about the contents and installation of the patch.
PF_CPIW4343.tar.gz
189
contains the patch.
There is also an firmware update available for the (revision A) GSP service processors on the original
N4000 (A3639A and A3639B) which contains the latest version A.01.12.
PF_CPREGSPA0112.txt
190
has details about the contents and installation of the patch.
PF_CPREGSPA0112.tar.gz
191
contains the patch.
There is also an firmware update available for the revision B GSP service processors on the A3639C
rp7400 which contains the latest version B.02.20.
PF_CCANGSPB0220.txt
192
has details about the contents and installation of the patch.
PF_CCANGSPB0220.tar.gz
193
contains the patch.
188
ftp://ftp.itrc.hp.com/firmware_patches/hp/cpu/PF_CPIW4343.txt
189
ftp://ftp.itrc.hp.com/firmware_patches/hp/cpu/PF_CPIW4343.tar.gz
190
ftp://ftp.itrc.hp.com/firmware_patches/hp/cpu/PF_CPREGSPA0112.txt
191
ftp://ftp.itrc.hp.com/firmware_patches/hp/cpu/PF_CPREGSPA0112.tar.gz
192
ftp://ftp.itrc.hp.com/firmware_patches/hp/cpu/PF_CCANGSPB0220.txt
193
ftp://ftp.itrc.hp.com/firmware_patches/hp/cpu/PF_CCANGSPB0220.tar.gz
263
Comentários a estes Manuais