HP Vectra 520 Guia de Instalação descarregar pdf (Página 129)

100

101

4-22 Hardware installation: Intelligent Peripheral Equipment module

553-4001-111 Standard 1.0 March 1997

Each of the eight DB-25 connectors can connect to a peripheral device.

Cable A services Ports 1, 3, 5, and 7. Cable B services Ports 2, 4, 6, and 8.

Refer to the Communication Port Assignment Sheet (see Table 4-11) when

connecting peripherals to cables.

Inside the back of the IPE cabinet, on the left and right of the backplane

cover, are the NT8D37 IPE cabinet I/O panels, as shown in Figure 4-10.

The key telephone connectors of each four-port cable are connected to

these panels. The connectors on the panel are labeled with a letter between

A and U. Each lettered connector is connected to a corresponding slot at the

front of the Option 21–81.

Connect the four-port cables to the IPE cabinet connectors. Make sure the

connectors are secure. Table 4-6 shows to which connectors on the I/O

panel Cable A (NT1R03AA) and Cable B (NT1R03BA) connect depending

on the slot placement of the Meridian MAX IPE/IPE-E in the Option

21–81. For example, if your Meridian MAX IPE/IPE-E module occupies

slots 4, 5, 6, and 7, Cable A connects to connector H and Cable B connects

to connector E.

Table 4-6

IPE cabinet peripheral cable connector assignment sheet

Module Slot Combinations Cable

A B

0-3 D A

1-4 E B

2-5 F C

3-6 G D

4-7 H E

8-11 N K

9-12 R L

10-13 S M

11-14 T N

12-15 U R

telemanuals.com

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 502 503

Comentários a estes Manuais

Sem comentários

HP Vectra 520 Guia de Instalação Página 129

Comentários a estes Manuais

Manuais e produtos relacionados com Barebones PC/estação de trabalho HP Vectra 520