HP Vectra 520 Guia de Instalação descarregar pdf (Página 287)

100

101

6-32 Workstations

553-4001-111 Standard 1.0 March 1997

DEC VT420 or 100% compatible (Worldwide model)

Follow Procedure 6-4 to set up the DEC VT420 (Worldwide model)

workstation.

Procedure 6-9

To set up a VT420 or 100%-compatible terminal (Worldwide model)

1 Refer to the vendor’s manual for installation instructions.

2 The video display terminal (VDT) is connected to the SNN’s VME

multiport cable or the IPE’s four-port I/O cable using an NT8D96AE

(SNN) or NT1R03Ex (IPE) (male to female) cable. Refer to the

appropriate port assignment table for valid port assignments.

3 Power on the terminal and press the {SET-UP} key.

The VDT manual contains instructions on setting up the workstation’s

options.

4 Follow the settings in Figure 6-7 to configure a DEC VT420 Worldwide

model.

Each directory shown in these figures has its own screen and displays

the correct setting for each field. If any of the fields shown differ from

those on your screen, cursor to the field and press {RETURN} until the

correct information is displayed.

5 To move to the next set-up screen, cursor to

To Next Set-up

and press

{RETURN}.

6 Move the cursor to

To Directory

and press {RETURN}.

7 Move the cursor to

Save

and press {RETURN}.

8 To exit after saving the settings, press the {SET-UP} key.

1 2 ... 282 283 284 285 286 287 288 289 290 291 292 ... 502 503

Comentários a estes Manuais

Sem comentários

HP Vectra 520 Guia de Instalação Página 287

Comentários a estes Manuais

Manuais e produtos relacionados com Barebones PC/estação de trabalho HP Vectra 520