HP Vectra 520 Guia de Instalação descarregar pdf (Página 289)

100

101

6-34 Workstations

553-4001-111 Standard 1.0 March 1997

DEC VT220 or 100% compatible

Follow Procedure 6-10 to set up the DEC VT220 workstation.

Procedure 6-10

To set up a VT220 or 100%-compatible terminal

1 Refer to the vendor’s manual for installation instructions.

2 The video display terminal (VDT) is connected to the SNN’s VME

multiport cable or the IPE’s four-port I/O cable using an NT8D96AE

(SNN) or NT1R03Ex (IPE) (male to female) cable. Refer to the

appropriate port assignment table for valid port assignments.

3 Power on the terminal and press the {SET-UP} key.

The VDT manual contains instructions on setting up the workstation’s

options.

4 Follow the settings in Figure 6-8 to configure a DEC VT220 VDT.

Each directory shown in Figure 6-8 has its own screen and displays the

correct setting for each field. If any of the fields shown differ from those

on your screen, cursor to the field and press {RETURN} until the

correct information is displayed.

5 To move to the next set-up screen, cursor to

To Next Set-up

and press

{RETURN}.

6 Move the cursor to

To Directory

and press {RETURN}.

7 Move the cursor to

Save

and press {RETURN}.

8 To exit after saving the settings, press the {SET-UP} key.

1 2 ... 284 285 286 287 288 289 290 291 292 293 294 ... 502 503

Comentários a estes Manuais

Sem comentários

HP Vectra 520 Guia de Instalação Página 289

Comentários a estes Manuais

Manuais e produtos relacionados com Barebones PC/estação de trabalho HP Vectra 520