HP Vectra 520 Guia de Instalação descarregar pdf (Página 99)

100

101

3-44 Hardware installation: Application Module (SNN/SNN-E)

553-4001-111 Standard 1.0 March 1997

Hardware upgrades and replacements

As your operation and needs grow, so may your need to expand the system.

You can add MVME332XTS/XT eight-channel asynchronous boards to the

Meridian MAX, provided that the maximum capacity for the system is not

exceeded. With each additional MVME332XTS/XT card, the number of

available ports increases by increments of eight.

The SNN/SNN-E hardware platform can support between 8 and 40 ports.

It is less likely that you may need to replace a component of the system. If

this is required, the upgrade instructions given in this section permit you to

make the replacement.

Note: All upgrades and replacements must be performed by qualified

technicians.

CAUTION

Risk of equipment damage

Use an antistatic wrist strap before you remove

components from an antistatic bag. Failure to do so

can result in damage to components.

CAUTION

Risk of data corruption

Shut down the system from the maintenance menu,

then secure the system before powering down the

module.

If you are adding a module to your system, power

down the column. Once the appropriate equipment

is powered down, remove the column’s faceplate

and back plate for the appropriate shelf.

See the “Meridian MAX power-down procedure”

chapter for more information.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 502 503

Comentários a estes Manuais

Sem comentários

HP Vectra 520 Guia de Instalação Página 99

Comentários a estes Manuais

Manuais e produtos relacionados com Barebones PC/estação de trabalho HP Vectra 520