HP Vectra 520 Guia de Instalação descarregar pdf (Página 159)

100

101

4-52 Hardware installation: Intelligent Peripheral Equipment module

553-4001-111 Standard 1.0 March 1997

Hardware replacements

CAUTION

Risk of equipment damage

Use an antistatic wrist strap before you remove

components from an antistatic bag. Failure to do

so results in damage to components.

All replacements must be performed by qualified technicians.

CAUTION

Risk of data corruption

Shut down the system from the maintenance menu,

then secure the system before powering down the

module.

If you are adding a module to your system, power

down the column. Once the appropriate equipment

is powered down, remove the column’s faceplate

and back plate for the appropriate shelf.

See the “Meridian MAX power-down procedure”

chapter for more information.

Procedure 4-2 details instructions on performing a hardware replacement.

Procedure 4-2

To perform the hardware replacement

1 Shut down the Meridian MAX software, then ensure that the power to

the IPE module is turned off.

Refer to the “Meridian MAX power-down procedure” chapter for

instructions on how to shut down the Meridian MAX software.

2 Remove the Meridian MAX IPE/IPE-E module from the Option 11 or

Option 21

–81.

Move the latches at the top and bottom of the module to the unlatched

position. Slowly slide the module along the slots and remove it from the

cabinet.

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 502 503

Comentários a estes Manuais

Sem comentários

HP Vectra 520 Guia de Instalação Página 159

Comentários a estes Manuais

Manuais e produtos relacionados com Barebones PC/estação de trabalho HP Vectra 520