HP Vectra 520 Guia de Instalação descarregar pdf (Página 38)

100

101

2-4 Site preparation

553-4001-111 Standard 1.0 March 1997

Environmental requirements

Ensure that your site can maintain the required environmental conditions

for the Meridian MAX hardware before beginning the installation.

Note: At all times, the front and back panels of the Application

Equipment Module (AEM) and the Meridian 1 should be closed and

latched. This ensures that the temperature within the Meridian column

remains reasonably constant and within the operating temperatures of

the equipment.

Meridian MAX Application Module

The following list details the environmental requirements for your Meridian

MAX hardware:

• operating temperature between 10°C–35°C (50°F–104°F)

• non-operating temperature between –10°C–60°C (14°F–140°F)

• changes in temperature less than 20°C/hour (68°F/hour)

• operating humidity between 20%–80% (noncondensing)

• nonoperating humidity between 20%–80% (noncondensing)

• operating altitude between 0–3.24 km (0–10 000 ft)

Meridian MAX IPE/IPE-E module

The environmental requirements for the Meridian MAX IPE/IPE-E

hardware are

• operating temperature between 10°C–35°C (50°F–95°F)

• non

-operating temperature between –20°C–70°C (–4°F–158°F)

• changes in temperature less than 20°C/hour (68°F/hour)

• operating humidity between 20%–80% (noncondensing)

• nonoperating humidity between 20%–90% (noncondensing)

• operating altitude between 0–3.24 km (0–10 000 ft)

• nonoperating altitude between 0–9.14 km (0–30 000 ft)

To use the HP LaserJet II printer, the environmental range must be between

10°C–32.5°C (50°F–90.5°F) with a maximum altitude of 2.6 km (8200 ft).

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 502 503

Comentários a estes Manuais

Sem comentários

HP Vectra 520 Guia de Instalação Página 38

Comentários a estes Manuais

Manuais e produtos relacionados com Barebones PC/estação de trabalho HP Vectra 520