HP Vectra 520 Guia de Instalação descarregar pdf (Página 394)

100

101

New software installations 11-3

Meridian MAX

Installation Guide

Product release 8

Autoboot in progress... To abort hit <BREAK>

5 Press {BREAK} to stop the hard disk load and begin the tape load.

Note:

{F5} on the VT520 and VT420 is equivalent to the {BREAK} key.

The system displays the following prompt.

––Break Detected––

xxx–Bug>

Note

: (The “xxx” will be 177 for SNN-E, 167 for SNN, and 4120 for

IPE/IPE-E.)

6 Wait for the tape to rewind. The tape drive light turns off when the tape

is rewound.

At the previous prompt, enter bo 0,40 followed by {RETURN}.

Booting from: xxxxxx, Controller 0, Drive 40

Note

: (The “xxxxxx” will be VME177 for SNN-E, VME167 for SNN, and

M4120 for IPE/IPE-E.)

Loading: Operating System

Volume: V/68

IPL loaded at: $001F0000

MVMETAPE IPL Version 1.0

There is a one- to two-minute delay before the system continues with

the following:

***********************************************************

System V/68 Release R3V8 xxxxxx Version 950119

Note

: (The “xxxxxx” will be M68060 for SNN-E and M68040 for SNN or

IPE/IPE-E.)

Real mem = xxxxxxxx

Note

: (The “xxxxxx” will be 65011712 for SNN-E, 31457280 for SNN,

and 14680064 for IPE/IPE-E.)

Avail mem = xxxxxxxx

Note

: (The “xxxxxx” will be 63111168 for SNN-E, 29859840 for SNN,

and 13230080 for IPE/IPE-E.)

Buffers = 60

***********************************************************

1 2 ... 389 390 391 392 393 394 395 396 397 398 399 ... 502 503

Comentários a estes Manuais

Sem comentários

HP Vectra 520 Guia de Instalação Página 394

Comentários a estes Manuais

Manuais e produtos relacionados com Barebones PC/estação de trabalho HP Vectra 520