HP Vectra 520 Guia de Instalação descarregar pdf (Página 465)

100

101

13-14 Operating modes

553-4001-111 Standard 1.0 March 1997

4 If your Meridian MAX and Meridian 1 are not in the same mode, enter n

to quit, followed by {RETURN}. The main menu is displayed.

If you have verified that your Meridian MAX and the Meridian 1 are

running in the same mode, enter y, followed by {RETURN}.

5 If you are working on an SNN/SNN-E platform, go to Step 11.

If you are working on an IPE/IPE-E platform, go to Step 6.

6 The Alter / View Meridian MAX IPE/IPE-E Information screen appears.

Figure 13-5

Alter/View Meridian MAX IPE/IPE-Enhanced Module Information screen

Alter / View Meridian MAX - IPE/IPE-Enhanced Module Information

All the information below must be entered before you can enter ”Product Mode”

Meridian 1 Option Type : # *

The card slots occupied by the Meridian MAX - IPE/IPE-Enhanced Module on the

Meridian 1 Switch (TN format) : 0 0 4

0 0 5

0 0 6

0 0 7 **

Press y and Enter to change any/all of the information above.

(Just Enter to quit):

* # is the Option Type number

** This card slot number would only appear if you are using Option

21–81 because it occupies four slots in the Meridian 1 switch.

The information in this screen is already in the system and is displayed

for confirmation.

7 If the information is correct, press {RETURN}. Go to Step 11.

If the information is incorrect, type y, followed by {RETURN}.

1 2 ... 460 461 462 463 464 465 466 467 468 469 470 ... 502 503

Comentários a estes Manuais

Sem comentários

HP Vectra 520 Guia de Instalação Página 465

Comentários a estes Manuais

Manuais e produtos relacionados com Barebones PC/estação de trabalho HP Vectra 520